Wet molding
Jcsportline group possesses varies composite manufacturing technologies from most advanced mass production processing system.
Recycled fiber mats can be used in the wet molding process. The manufacturing process for the fiber mats can reuse materials such as the waste product from cutting fiber mats made of continuous fibers. This involves binding the individual fibers and forming them into mats again. However, the fibers are no longer aligned, but instead statically distributed. The flow resistance would be extremely high for impregnation in a closed mold, which is why the resin is added outside of the mold.
—— Short cycle time via resin application outside the press
—— High level of productivity through multiple insertion of the press
01
02
03
04
05
06
07
Unwind the fiber material and cut fiber blanks
Stack the blanks to create the correct layup
Insert the fiber stack into the mold
Apply the resin through a dispenser
Close the mold and impregnate the fiber stack by the stroke of the press
Cure the resin while maintaining pressure on the mold
Demold the fully cured part
AUTOCLAVE
Small to medium resin transfer molding process .
+ DISCOVER MORE
PCM
High-volume prepreg forming process in hot compression molding press .